UA-22935236-26

Vibration meters


We’re offering a wide range of vibration meters with all their specific applations.

Hand-Held Vibration Meters VMxx Series
Condition monitoring of rotating and reciprocating machines to ISO 20816-1, ISO 10816-6, IEC 60034-14, etc.
Evaluation of roller bearing condition to VDI 3832 etc. (VM24 and VM25)
Human vibration (VM31)
Measurements at vibration conveyors, vibrating screens and separators (VM23)
Graphical trend display (VM2x)Frequency analysis (VM25/31)
Main frequency display (VM23)
Non-contact rotation speed measurement with laser pointer (VM25)Infrared temperature sensor (VM25)
Electronic identification of measurement points with VMID points via the sensor baseUSB interface, PC software for measuring point management to MIMOSA convention and measuring data archivingPocket-sized
Condition monitoring of rotating and reciprocating machines to ISO 20816-1, ISO 10816-6, IEC 60034-14, etc.
Evaluation of roller bearing condition to VDI 3832 etc. (VM24 and VM25)
Human vibration (VM31)
Measurements at vibration conveyors, vibrating screens and separators (VM23)
Graphical trend display (VM2x)Frequency analysis (VM25/31)
Main frequency display (VM23)
Non-contact rotation speed measurement with laser pointer (VM25)Infrared temperature sensor (VM25)
Electronic identification of measurement points with VMID points via the sensor baseUSB interface, PC software for measuring point management to MIMOSA convention and measuring data archivingPocket-sized

VM22
VM23VM24VM25VM31
Please click on pictures for more details     
Measuring channels11114
InputsL.P. IEPE + VMIDL.P. IEPE + VMIDL.P. IEPE + VMIDL.P. IEPE + VMIDL.P. IEPE + TEDS
Measuring ranges
Vibration acceleration0.1 – 240m/s²0.1 – 240m/s²0.1 – 800 m/s²
Vibration velocity0.1 – 1000mm/s0.1 – 1000mm/s0.1 – 1000mm/s0.1 – 1000mm/s0.1 – 10000 mm/s
Vibration displacement0.01 – 60 mm0.01 – 60 mm0.01 – 60 mm1 – 15000 µm
Temperature-40 – 125 °C
Rotary speed1 – 9999 rpm
Frequency ranges
Vibration acceleration0.2 Hz – 10 kHz
3 Hz – 1 kHz
1 kHz – 10 kHz
0.2 Hz – 10 kHz
3 Hz – 1 kHz
1 kHz – 10 kHz
0.1 – 2000 Hz
1 – 1000 Hz
Vibration velocity10 – 1000 Hz2 – 100 Hz
10 – 1000 Hz
2 – 1000 Hz
10 – 1000 Hz /td>
2 – 1000 Hz
10 – 1000 Hz
1 – 100 Hz
2 – 1000 Hz
10 – 1000 Hz
Vibration displacement3 – 60 Hz
3 – 200 Hz
5 – 200 Hz5 – 200 Hz5 – 250 Hz
Other features
Human vibration measurementyes
RMS measurementyesyesyesyesyes
Peak measurementyes (pk-pk)yesyesyes
Crest factor measurementyes
Vector sum (X/Y/Z)yes
Main frequencyyes
Bearing diagnostic coefficient K(t)yes
Vibration dose value (VDV)yes
Frequency analysis512 lines FFT for main frequency (no spectrum)125 lines FFT; 10 frequency ranges, 23 – 11712 Hz125 lines FFT;4 frequency ranges, 240 – 1920 Hz
Headphone outputyes
Measurement memory16000 measurements, USB interface16000 measurements, USB interface16000 measurements, USB interface16000 measurements, USB interface10000 measurements, USB interface
Accessories
Supplied accelerometerKS82LKS82LKS82LKS82L
Sensor probe (option)VM2x-TVM2x-TVM2x-TVM2
x-T

KS82L

• Output Low Power IEPE Piezosystem

• Piezo design Scherprinzip • Shear design

• Voltage sensitivity Bua 35 ± 20 % mV/g

• Range a+ / a- ± 60 g

• Destruction limit amax 8000 g

• Linear frequency range f 3 dB f 10 % f 5 % 0,2 .. 14000 0,4 .. 10000 0,6 .. 7500 Hz Hz Hz

• Resonant frequency f r >20 (+25 dB) kHz

• Transverse sensitivity Γ90MAX < 5 %

• Residual noise (RMS; 0.5 Hz – 20 kHz) an wide band < 1 mg

• Noise densities 0,1 Hz 1 Hz 10 Hz 100 Hz an1 an2 an3 an4 50 20 5 2 µg/√Hz µg/√Hz µg/√Hz µg/√Hz

• Constant current supply I CONST 0,5 .. 5 mA

• Output bias voltage at ICONST=4 mA UBIAS 6 .. 7,5 V

• Output impedance at ICONST=4 mA rOUT < 200 Ω

• Environmental characteristics

• Operating temperature range Tmin/Tmax -40 / 100 °C

• Temp. coefficient of sensitivity TK(Bua) -0,03 .. -0,12 %/K

• Temperature transient sensitivity baT 0,005 ms-2/K

• Protection grade IP67

• Mechanical data

• Weight without cable m 54 / 1,9 g / oz

• Case material Edelstahl

• Cable connection

• Socket Binder 713 (M12)

• Pulling force of magnetic base FZ 80 N

• Mounting, Magnet in base

KS82L
KS82L Base
Vibration Specialists Asia